Journal: BMC Oral Health

Article Title: Comparison of the flexural strength of printed and milled denture base materials

doi: 10.1186/s12903-024-04695-8

Figure Lengend Snippet: 3D Microscope images of AvaDent specimen fractured after 3-point bending test 3D Microscope images under x40 Magnification with blue arrows exhibiting the force direction. The approximated fractured joints under x20 magnification exhibited the tension and compression side of the fracture. No obvious deformation was observed at the fracture side

Article Snippet: On the left, image showing pattern of fracture of the specimen Fig. 11 3D Microscope images of Dentca specimen fractured after 3-point bending test.

Techniques: Microscopy

Journal: BMC Oral Health

Article Title: Comparison of the flexural strength of printed and milled denture base materials

doi: 10.1186/s12903-024-04695-8

Figure Lengend Snippet: 3D Microscope image of Dentsply Block specimen fractured after 3-point bending. 3D Microscope images under x40 Magnification with blue arrows exhibiting the force direction. The approximated fractured joints under x20 magnification exhibited the tension and compression side of the fracture. Minute deformation on the tensile side, with clear sharp fracture at the compression side

Article Snippet: On the left, image showing pattern of fracture of the specimen Fig. 11 3D Microscope images of Dentca specimen fractured after 3-point bending test.

Techniques: Microscopy, Blocking Assay

Journal: BMC Oral Health

Article Title: Comparison of the flexural strength of printed and milled denture base materials

doi: 10.1186/s12903-024-04695-8

Figure Lengend Snippet: 3D Microscope images of Keystone specimen fractured after 3-point bending test 3D Microscope images under x40 Magnification with blue arrows exhibiting the force direction. The approximated fractured joints under x20 magnification revealed the tensile and compression side of the fracture. Minute deformation on the tensile side, it is clear at the fracture edges. Clear sharp fracture on the compression side

Article Snippet: On the left, image showing pattern of fracture of the specimen Fig. 11 3D Microscope images of Dentca specimen fractured after 3-point bending test.

Techniques: Microscopy

Journal: BMC Oral Health

Article Title: Comparison of the flexural strength of printed and milled denture base materials

doi: 10.1186/s12903-024-04695-8

Figure Lengend Snippet: 3D Microscope images of Lucitone 3D print specimen fractured after 3-point bending test. 3D Microscope images under × 40 Magnification with blue arrows exhibiting the force direction. The approximated fractured joints under × 20 magnification indicated the tensile and compression side of the fracture. Clear deformation on the tension side. Clear sharp fracture at the compression side

Article Snippet: On the left, image showing pattern of fracture of the specimen Fig. 11 3D Microscope images of Dentca specimen fractured after 3-point bending test.

Techniques: Microscopy

Journal: BMC Oral Health

Article Title: Comparison of the flexural strength of printed and milled denture base materials

doi: 10.1186/s12903-024-04695-8

Figure Lengend Snippet: 3D Microscope images of Dentca specimen fractured after 3-point bending test. 3D Microscope images under × 40 Magnification with blue arrows exhibiting the force direction. The approximated fractured joints under × 20 magnification exhibited the tension and compression side of the fracture. Clear deformation on the edges of the fracture on tension side. Compression side exhibited the brittleness of the material and deformation below the outside layer of the specimen

Article Snippet: On the left, image showing pattern of fracture of the specimen Fig. 11 3D Microscope images of Dentca specimen fractured after 3-point bending test.

Techniques: Microscopy

Journal: BMC Oral Health

Article Title: Comparison of the flexural strength of printed and milled denture base materials

doi: 10.1186/s12903-024-04695-8

Figure Lengend Snippet: 3D Microscope images of Formlabs specimen fractured after 3-point bending test. 3D Microscope images under ×40 magnification with blue arrows exhibiting the force direction. The approximated fractured joints under ×20 magnification exhibited the tensile and compression side of the fracture. Minute deformation on the edges of the fracture was on tension side. The compression side exhibited brittleness of the material and the corresponding deformation occurred below the outside layer of the specimen. The fractured pieces were observed at this side. These patterns displayed the behavior of brittle materials

Article Snippet: On the left, image showing pattern of fracture of the specimen Fig. 11 3D Microscope images of Dentca specimen fractured after 3-point bending test.

Techniques: Microscopy

Journal: BMC Oral Health

Article Title: Comparison of the flexural strength of printed and milled denture base materials

doi: 10.1186/s12903-024-04695-8

Figure Lengend Snippet: 3D Microscope images of repaired AvaDent specimens under ×40 magnification. A , B , and C images represents the denture base bar repaired with composite resin. There was no composite resin residue found on the fracture side. D , E , and F images represents the denture base bar repaired with acrylic. There was a tiny amount of acrylic residue (indexed by blue arrow) found on the fracture side

Article Snippet: On the left, image showing pattern of fracture of the specimen Fig. 11 3D Microscope images of Dentca specimen fractured after 3-point bending test.

Techniques: Microscopy, Residue

Journal: BMC Oral Health

Article Title: Comparison of the flexural strength of printed and milled denture base materials

doi: 10.1186/s12903-024-04695-8

Figure Lengend Snippet: 3D Microscope of repaired Dentsply Block specimen under 40× magnification A , B and C images were the denture base bar repaired with composite resin. Composite resin residue (indexed by blue arrow) found on one fractured side only. D , E and F images were the denture base bar repaired with acrylic. Acrylic residue found on one fractured side only ( F)

Article Snippet: On the left, image showing pattern of fracture of the specimen Fig. 11 3D Microscope images of Dentca specimen fractured after 3-point bending test.

Techniques: Microscopy, Blocking Assay, Residue

Journal: BMC Oral Health

Article Title: Comparison of the flexural strength of printed and milled denture base materials

doi: 10.1186/s12903-024-04695-8

Figure Lengend Snippet: 3D Microscope of repaired Keystone specimen under 40× magnification A , B and C images were the denture base bar repaired with composite resin. There was no composite resin residue found on the fracture side. D , E and F images were the denture base bar repaired with acrylic. Acrylic residue found on one fracture side only ( F )

Article Snippet: On the left, image showing pattern of fracture of the specimen Fig. 11 3D Microscope images of Dentca specimen fractured after 3-point bending test.

Techniques: Microscopy, Residue

Journal: BMC Oral Health

Article Title: Comparison of the flexural strength of printed and milled denture base materials

doi: 10.1186/s12903-024-04695-8

Figure Lengend Snippet: 3D Microscope of Formlabs repaired specimen under 40× magnification A , B and C images were the denture base bar repaired with composite resin. Partial composite resin residue (indexed by blue arrow) found on both sides. D , E and F images were the denture base bar repaired with acrylic. Acrylic residue found on one fracture side only ( E )

Article Snippet: On the left, image showing pattern of fracture of the specimen Fig. 11 3D Microscope images of Dentca specimen fractured after 3-point bending test.

Techniques: Microscopy, Residue

Journal: BMC Oral Health

Article Title: Comparison of the flexural strength of printed and milled denture base materials

doi: 10.1186/s12903-024-04695-8

Figure Lengend Snippet: 3D Microscope of Dentca repaired specimen under 40× magnification A , B and C images were the denture base bar repaired with composite resin. Partial composite resin residue (indexed by blue arrow) found on both sides of the fracture. D , E and F images were the denture base bar repaired with acrylic. Acrylic residue found on one fracture side only ( F )

Article Snippet: On the left, image showing pattern of fracture of the specimen Fig. 11 3D Microscope images of Dentca specimen fractured after 3-point bending test.

Techniques: Microscopy, Residue

Journal: BMC Oral Health

Article Title: Comparison of the flexural strength of printed and milled denture base materials

doi: 10.1186/s12903-024-04695-8

Figure Lengend Snippet: 3D Microscope of Lucitone 3D print repaired specimen under 40× magnification A , B and C images were the denture base bar repaired with composite resin. Composite resin residue found on both fractured sides. D , E , and F images were the denture base bar repaired with acrylic. Acrylic residue found on one fracture side only (F)

Article Snippet: On the left, image showing pattern of fracture of the specimen Fig. 11 3D Microscope images of Dentca specimen fractured after 3-point bending test.

Techniques: Microscopy, Residue